Cross Section Drawing  
 
Mechanical Specifications  
Jacket Material                Polyvinyl chloride(PVC)
Conductor Material         23AWG Solid Bare copper
Insulation Material          High-density polyethylene
Cross Material                High-density polyethylene
Shield (Tape) Material:  Aluminum/Polyester
Pairs, quantity                4
Rip cord                         Nylon
Cable Outer Diameter:  6.2±0.2mm
Jacket Color: Grey (Other colors can be customized)
Bending radius: 4 times the diameter of the cable
Tensile strength: ≤ 93N; maximum retention : 25lbs (11.35kg);
Electrical Specifications
Characteristic Impedance                    100 ohm
Characteristic Impedance Tolerance   ±15 ohm
Operating Voltage, maximum              80 V
Rated transmission speed (NVP):       67%
Transmission delay: 530ns / 100m max. @ 100MHz;
Environmental Specifications  
Operating  Temperature                     -20 °C to  +60 °C
Storage  Temperature                        -20 °C to  +75 °C
Standards
International :  ISO/IEC 11801; ISO/IEC 61156-5；EN55022
National :  ANSI/TIA-568-C.2; TIA/EIA-568-B.2
Flammability: Conforms to IEC 60332-1